Opel Insignia Owners & Service Manuals

Opel Insignia: Maintenance and Lubrication

SPECIFICATIONS

APPROXIMATE FLUID CAPACITIES

SPECIFICATIONS

FLUID AND LUBRICANT RECOMMENDATIONS

SPECIFICATIONS

MAINTENANCE ITEMS

SPECIFICATIONS

MAINTENANCE REPLACEMENT PARTS

Replacement parts identified below by name, part number, or specification can be obtained from your dealer.

SPECIFICATIONS

SPECIFICATIONS

MAINTENANCE

MAINTENANCE SCHEDULE

The Maintenance Schedule information will only be found in the Owner's Manual.

Refer to the Maintenance Schedule subsection of the Owner's Manual, or you may be able to use the Search information function using the words Scheduled Maintenance.

GM OIL LIFE SYSTEM RESETTING (WITHOUT SCAN TOOL)

When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A CHANGE ENGINE OIL message or light will come on. Change the engine oil as soon as possible within the next 600 miles (1 000 km). It is possible that, if driving under the best conditions, the oil life system may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.

If the system is ever reset accidentally, change the engine oil at 3, 000 miles (5 000 km) since last oil change.

How to Reset the Engine Oil Life System

Reset the system whenever the engine oil is changed so that the system can calculate the next engine oil change. To reset the system:

1. Turn the ignition to ON/RUN with the engine off.

2. Press the DIC menu button on the turn signal lever to scroll through the menu items on the DIC screen.

3. Press the set button to clear the CHANGE ENGINE OIL SOON message and/or restore the REMAINING OIL LIFE 100% message.

4. Turn the ignition to LOCK/OFF.

The system is reset when the CHANGE ENGINE OIL SOON message is off and the REMAINING OIL LIFE 100% message is displayed.

If the CHANGE ENGINE OIL message comes back on when the vehicle is started, the engine oil life system has not been reset. Repeat the procedure.

GM OIL LIFE SYSTEM RESETTING (WITH SCAN TOOL)

When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A ENGINE OIL light message will come on. Change the engine oil as soon as possible within the next 600 miles (1 000 km). It is possible that, if driving under the best conditions, the oil life system may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.

(If applicable)With Scan Tool

1. Ignition - On / Vehicle - In Service Mode.

2. Select: Module Diagnostics.

3. Select: K20 Engine Control Module.

4. Select: Configuration/Reset Functions.

5. Select: Reset Functions.

6. Select: Engine Oil Life Reset.

7. Enter the desired value.

8. Select: Continue.

    READ NEXT:

     Tire Pressure Monitor Systems

     Model Coverage, Description & Operation

    MODEL COVERAGE Model Coverage Insignia 2011-19 Verano 2012-17 DESCRIPTION & OPERATION NOTE: The TPMS sensor Relearn procedure must be performed after every tire rotation, BCM replacement, or

     TPMS Reset Procedures

    NOTE: The TPMS sensor Relearn procedure must be performed after every tire rotation, BCM replacement, or sensor replacement. When the tire pressure monitor system detects a significant loss, or gain

    SEE MORE:

     Repair Instructions

    BODY WATERLEAK REPAIR WARNING: If the vehicle interior is exposed to moisture and becomes soaked up to the level of the sensing and diagnostic module (SDM), the SDM and SDM harness connector must be replaced. The SDM could be activated when powered, which could cause airbag deployment and result i

     Mirrors

    SPECIFICATIONS FASTENER SPECIFICATIONS Reusable Threaded Fastener Tightening Specifications NOTE: All fasteners listed in this table can be reused after removal. SCHEMATIC WIRING DIAGRAMS INSIDE REARVIEW MIRROR WIRING SCHEMATICS Auto-Dimming Mirror (DD8) OUTSIDE REARVIEW MIRROR WIRING SCHEMATICS D

    © 2019-2024 Copyright www.opinsb.com